Table of Contents
Advertisement
PROGRAM mode: HD-1
0–6e: Scene 1–4 Button
Selects the scene.
When step sequence B
is selected
Scene button
0–6f: Edit button
Switches the ARP DRUM tab page to Edit view.
You can configure the scene settings in Edit view. Here we
configure the arpeggiator, drum track and step sequencer
settings for each of the scene buttons.
Configures the arpeggiator and drum functions. The
parameters of Scene Common Setup and Edit STEP
SEQUENCE are used in common for all scenes.
Scene Common Setup
(Program for Drum)
Select the Program to be used for the drum track or step
sequencer.
Scene Cue Mode
Select either "Immediately" or "Measure" for the timing to
be used when you change scenes while they are playing.
Immediately: The scene will be changed right away once a
new scene is selected.
Measure: After the new scene is selected, the scene will be
changed upon moving to the next measure in the scene, or
when the scene returns to the beginning.
Note: The length of a scene or its measures is determined by
the arpeggiator or drum track/step sequencer settings in that
scene. When the drum function is off, the scene length will
be the length of the selected drum track or step sequencer.
When the drum function is off, the length of the scene is
used for the length of the arpeggiator.
16
Arpeggiator A (when latch is enabled)
Arpeggiator B (when 1Shot is enabled)
When the drum track is selected
Time signature
[0...127 (A...T),
1...128 (G, g(1)...g(9), g(d))]
Note: When the drum function is off and the arpeggiator
pattern is set to the preset pattern, the "Immediately" setting
will be used, since it does not have a length parameter.
More
Open the Scene Common Setup detailed settings dialog box.
Common/Scan Zone :
Scan Zone
Bottom Key
Top Key
This sets the tonal range in which the arpeggiator operates,
or the tonal range in which the drum track/step sequencer is
triggered. Set the top of the range using "Top Key", and the
bottom of the range using "Bottom Key".
VelocityZone
Bottom
Top
This sets the velocity range in which the arpeggiator
operates, or the velocity range over which the drum
track/step sequencer is triggered. Set the top of the range
using "Top Velocity", and the bottom of the range using
"Bottom Velocity".
You cannot set the top value for the keyboard or the velocity
range lower than the bottom value, or the bottom value
higher than the top value.
Drum Trigger
Trigger Mode [Start Immediately, Wait KBD Trig]
Start Immediately: When the DRUM function is turned on
(the LED will light), the drums will start playing according
to the synchronization settings. When you turn the function
off, the drums will stop.
Wait KBD Trig: When the DRUM function is turned on
(the LED will blink), the drums will be in standby mode.
When you play the keyboard or when the NAUTILUS
receives a MIDI note-on, the drums will start playing
according to the synchronization settings.
When this is set to "Start Immediately", this will always be
saved as "off" for the DRUM function.
Latch
[Off, On, Use Latch Button]
This is enabled when "Trigger Mode" is set to "Wait KBD
Trigger".
[C–1...G9]
[C–1...G9]
[001...127]
[001...127]
Advertisement
Table of Contents
