Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
3.
4.
Step 3 Click
----End
8.4.1.10 Adding a ContainerDC
This topic describes how to add a container.
Prerequisites
You have logged in to the NetEco client by web browser.
Procedure
Step 1 Choose System > Configuration Management > Data Center Planning from the main
menu. The Data Center Planning window is displayed.
Step 2 Choose the upper-layer node of the container to be added in the navigation tree on the left.
Step 3 Click Domain. The infrastructure area is displayed.In the lower left corner of the page, click
Management Domain to expand the managementregion.
Step 4 Select ContainerDC from the Type drop-down list.
Figure 8-14 Selecting the container
Step 5 Select the ContainerDC to be added and drag the container icon to the Design area.
Issue 02 (2019-12-20)
To delete a domain, click the domain icon and select Delete under
In the right side of the view area, set Management Info.
You can configure Management Info, Electricity Info, and Refrigeration Info for the equipment room
management domain.
Click
on the toolbar.
Repeat steps
Step 2.1
to
on the toolbar.
Copyright © Huawei Technologies Co., Ltd.
Step 2.4
until the configuration is complete.
8 Commissioning Core Components
.
87
Advertisement
Table of Contents
