FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Step 12 Click
Step 13 Choose System > Configuration Management > Transmission Channel Management.
Step 14 Click Modify after selecting the IP address of the ECC800 connected to the NMS.
Figure 8-21 Page for managing transparent transmission channels
----End
8.4.3 Scenarios for Connecting the server
8.4.3.1 Setting SMS
This section describes how to set the interworking parameters of the SMS modem on the
NetEco. This ensures that the NetEco can communicate with the SMS modem properly and
the modem sends short messages to users properly.
Prerequisites
Issue 02 (2019-12-20)
IP Address indicates the ECC800 login IP address. Port indicates the ECC800 COM2 port (3212).
Device Address indicates the Polymer T/H sensor address.
to save the created device view.
If Connection mode is set to Compatible, click Confirm.
On the ECC800 WebUI, Enable Security Authentication is set to Disable.
If Connection mode is set to Security protocol, enter the value of Confirm password
that has been set on the ECC800 WebUI, and click Confirm.
You have logged in to the NetEco client by web browser
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
96