Huawei FusionModule1000A Commissioning Manual page 101

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Figure 8-20 Adding an ECC800 device to the modular
Click OK, and you can view the task information, including Type, Device Name, Region, Progress,
Status, Start Time, End Time, and Information in the displayed Progress window.
After the ECC800 is bound to a modular, you can view the ECC800 in the corresponding modular on the
Data Center Planning page, or configure Management Info and Asset Information for the device as
required.
On the Data Center Planning page, the layout, number of half-sized rack spaces in a row, and devices
of the modular can be synchronized with those on the ECC800 WebUI.
Step 4 Select the device icon, and configure parameters for the device in the right pane based on
actual conditions.
Names of devices connected through ECC800:


Step 5 Click
After the ECC800 device is bound, select the ECC800 device in the left navigation tree. Then, change
the authentication password in the Management Info area so that the password on the ECC800 WebUI
is the same as that on the NetEco for the ECC800 to connect to the NetEco properly. The preset
authentication password for the ECC800 device is Modifyme_123.
Perform the following operations on the Modify page:
1. Enter the new password in the New password and Confirm password text boxes.
2. Perform the following operations as required in the Send To Device column.


3. Click OK.
You are advised to change the password once every three months.
Issue 02 (2019-12-20)
For devices that are synchronized to the NetEco through the ECC800 for the first time, their names
are different on the NetEco and web-based ECC800 client and are all the default names.
The modification of the device name on the ECC800 web client and the modification of the device
name on the NetEco are synchronized with each other.
in the upper area of the page to save device information.
If YES is selected, change and synchronize the authentication passwords for the ECC800 and
ECC800 WebUI synchronized on the server so that the authentication passwords on both sides are
the same.
If NO is selected, change the authentication password for the ECC800 synchronized on the server.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
94