Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
(Optional) Preparations for Modifying the Management System Initial
Configurations
As the management system parameters are complex, you are not allowed to modify the initial
configurations unless you are authorized by an appropriate person.
Initial configurations have been made for the FusionModule1000 management system before
delivery. To modify the initial configurations of the management system, make the following
preparations:
1.
2.
3.
7.3.2 Commissioning the Management System
Prerequisites
The FusionModule1000 is powered on, commissioned, and working properly.
During the commissioning, if any alarm is raised, clear the alarm before continuing the
commissioning.
Preparations
Tool: network cable tester
Documents: monitoring device layout diagram, management system initial configuration table
Skill requirement: weak-current engineer familiar with the management system
Procedure
Step 1 Commission the ECC800.
1.
2.
Issue 02 (2019-12-20)
Read through all related management system documents and get familiar with the
detailed management system configurations, configuration method, and operating
principles.
Get familiar with the initial configuration parameters of the management system by
referring to the management system initial configuration table in the initial configuration
parameter manual.
Modify the parameters for the management system based on the initial configuration
table, and save a copy for future reference.
Enter the initial user name and password on the ECC800 WebUI to log in to the ECC800
WebUI.
Check the connections of all monitoring devices by referring to the monitoring device
layout diagram.
Copyright © Huawei Technologies Co., Ltd.
7 System Commissioning
35
Advertisement
Table of Contents
