Huawei FusionModule1000A Commissioning Manual page 104

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide



Context
Procedure
Step 1 Choose System > System Settings > Set Notified Server from the main menu. The Set
Notified Server window is displayed.
Step 2 In the navigation tree on the left, choose SMS Modem.
Step 3 Set interworking parameters of the SMS modem. For details, see
Figure 8-22 Setting interworking parameters of the SMS modem
Table 8-16 Parameters of the SMS modem
Parameter
Network system of
SMS modem
SMS modem serial
port
SMS modem
bound rate
Mobile number for
receiving
notification
Issue 02 (2019-12-20)
An SMS modem has been installed and commissioned.
You have obtained the interworking parameters, such as the phone number for receiving
the notification, of the SMS modem from users.
You have the operation rights for Set Notified Server.
 The SMS modem is not supported in cloud deployment scenarios.
 You need to input calling number and Email for sending remote alarm notification. Therefore, you
are obligated to take considerable measures, in compliance with the laws of the countries concerned
and the user privacy policies of your company, to ensure that the personal data of users is fully
protected.
 Personal data such as phone numbers and Email addresses are anonymized in the NetEco GUI and
encrypted in the NetEco during batch data transmission to ensure data security.
Description
RAT of the SMS modem: GSM.
Serial port for connecting the SMS modem on the server.
COM1 or COM2.
SMS modem bound rate provided in the SMS modem user manual.
115200, 9600 or 4800.
Phone number to which the short messages are sent.
NOTE
Mobile number for receiving notification must be set according to the
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
Figure 8-22.
97