Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
8.2.3 Initial Configuration of Temperature and Humidity
Prerequisites
You have powered on the air-cooled precision smart cooling products.
Preparations
Tools: none
Documents: management system initial configuration table, cooling device layout diagram,
cooling device initial configuration table
Skill requirement: cooling engineer
For the diagrams and tables, see the initial configuration parameter manual for the solution in
use.
Context
Smart cooling products in one module constitute a group. You need to set the temperature and
humidity of the smart cooling product system on the master unit in each group before smart
cooling products in the group are used.
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H Sensor.
Figure 8-8 Setting temperature and humidity values
Issue 02 (2019-12-20)
To change the settings, you need to log in as the Admin user. For the password, see the management
system initial configuration table.
You need to obtain permission before changing system settings. Only trained and qualified personnel
can change settings excluding the control type and set point of the T/H sensor.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
72
Advertisement
Table of Contents
