Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Step 4 Enable ActiveX-related options for trusted sites.
After ActiveX-related options are enabled, a message is displayed, indicating that the computer is prone
to risks due to security settings. Ignore the message.
1.
2.
3.
Step 5 Register with the OCX plug-in.
Restart Internet Explorer and enter the IP address to be accessed by the client. The page for
watching videos is displayed. Click Install according to the prompt message. After the OCX
plug-in is installed, you can watch the videos. If videos are not displayed, contact Huawei
technical support.
If it is the first time to install the plug, you need to wait about 10 to 20 seconds.
Step 6 If the OCX plug-in needs to be registered on the client again, perform the following
operations to uninstall the OCX plug-in and then re-install it:
1.
2.
3.
Issue 02 (2019-12-20)
Choose Trusted sites > From definition rank. The Security setting – trusted stand
region dialog box is displayed, as shown in
Figure 8-31 Security setting – trusted stand region
Enable the following options and then click Ok.
−
Initialize and script ActiveX controls not marked as safe
−
Script ActiveX controls marked safe for scripting
−
Download signed ActiveX controls
−
Download unsigned ActiveX controls
A dialog box is displayed, indicating Does the determination need to change the
establishment of this region?. Click Yes.
Close Internet Explorer.
Find C disk directory folder exists eSDK_IVS folder, right-click to select Delete.
Restart Internet Explorer, enter the IP address for accessing the NetEco client, and open
the page for video modules. The NetEco automatically installs the OCX plug-in.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
Figure
8-31.
106
Advertisement
Table of Contents
