Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Figure 8-34 Positions of the buttons
S11 means plus 1 for the first two values of the nixie tube, and S10 means plus 1 for the last
two values of the nixie tube. The adjustment methods are as follows:
1.
2.
3.
4.
Step 5 Start or stop the fire alarm sounder.
When the keypad is unlocked, press ALARM BELL to start or stop the fire alarm sounder.
After the fire alarm sounder is started, the indicator beside the button turns on.
Step 6 Start or stop the fire alarm horn/strobe.
When the keypad is unlocked, press HORN/STROBE to start or stop the fire alarm
horn/strobe. After the alarm is started, the indicator beside the button turns on.
----End
Issue 02 (2019-12-20)
Press S12. The H11 indicator lights up, indicating that the time is being adjusted. The
nixie tube displays the year in the format of ? ?. Press S10 to add the value, which ranges
from 1 to 60.
Press S12 again to display month and date in the format of ? ? ? ?. Press S11 to adjust
the month, which changes cyclically between 1 and 12. Then press S10 to adjust the date,
which changes cyclically between 1 and 31.
Press S12 again to display hour and minute in the format of ? ?:? ?. Press S11 to adjust
the hour, which ranges from 0 to 23. Then press S10 to adjust the minute, which ranges
from 0 to 59.
Press S12 again to finish the time setting. The indicator H11 goes off. The nixie tube
displays the hour and minute.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
110
Advertisement
Table of Contents
