Huawei FusionModule1000A Commissioning Manual page 109

Prefabricated all-in-one data center
Hide thumbs Also See for FusionModule1000A:
Table of Contents

Advertisement

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
The IPC6325 camera is driven by the HWSDK protocol.
1.
2.
Table 8-17 Setting search criteria
Item
Start IP Address and End IP Address
Drive
Access domain
Mount Server
There are multiple VCNs for multiple smart modules, you are advised to evenly distribute the cameras to
each VCN.
3.
4.
5.
6.
Step 3 Configuring a Video Recording Plan.
1.
2.
3.
4.
If you set the recording plan policy is to All, you do not need to set the recording plan time.
5.
6.
Step 4 Create a user.
When connecting to the VCN on the NetEco, you need to log in to the VCN as a non-admin
user.
1.
Issue 02 (2019-12-20)
In the Quick Setup area on the VCN IVS home page, double-click Add Camera.
Click + in the lower left corner on the Search criteria page, setting the parameters
according to the following table, and click Next.
Click Search, in each camera record, enter the user name and password in the text boxes
and click Verify. If the camera is verified successfully, select cameras to add and click
Next.
Preview live video images, click the camera in the camera list on the left, and adjust
camera parameters to optimize the image effect. Then click Next.
(Optional) Group the cameras and click Next after grouping.
Click Finish to finish adding a camera.
In the Quick Setup area on the VCN IVS home page, double-click Server Recording
Plan.
Select the camera on the Cameras list and click Next.
(Optional) Set recording parameters, and click Next.
Set recording plan parameters in the Time settings. Drag the timeline to select the time
segment for implementing video recording.
Click Next to complete the recording plan setting. When
the recording plan has been set successfully.
Click Finish.
Log in to the VCN IVS as user Admin.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
Value
IP address range
HWSDK
Select the domain that cameras need to
access
Select the server that cameras need to access
is displayed in the status bar,
102

Advertisement

Table of Contents
loading

This manual is also suitable for:

V200r003c10

Table of Contents