Adding A Camera Using Automatic Discovery - Huawei FusionModule1000A Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
----End

8.4.4.1.5 Adding a Camera Using Automatic Discovery

This topic describes how to quickly add an online camera that is not in any management
domain to a management domain using the automatic discovery function provided by the
system.
Prerequisites




Procedure
Step 1 Choose Monitor > Security > Camera Management from the main menu.
Step 2 In the left navigation tree, choose Discovery Camera.
Step 3 On the Discovery camera page, add a camera by following the instructions provided in
Figure
Figure 8-32 Adding a camera using automatic discovery
Issue 02 (2019-12-20)
You have logged in to the NetEco client by web browser.
You have the operation rights for Camera Management.
You have set parameters on the Parameter Configuration page, and the connection
between the NetEco and VCN500 server is successful.
A camera has connected to the VCN server.
8-32.
 The method of adding a camera using automatic discovery applies to all other management domains
except Subnet and Root.
 After a camera is added, it will be displayed under the corresponding management domain on the
Data Center Planning page. On the Data Center Planning page, you can set parameters such as
the Name for the camera.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
107