Adding A Smartli - Huawei SmartLi-80Ah User Manual

SmartLi-80Ah
User Manual

5.5 Adding a SmartLi

Prerequisites
For online capacity expansion, you need to configure an external circuit breaker to control the
battery loop.
Context
This section describes how to add a SmartLi to four cabinets in parallel.
Figure 5-3 Adding a SmartLi
Procedure
Step 1 Install the new SmartLi.
Step 2 Remove the terminal of parallel port 1 on SmartLi 4 and connect the terminal to parallel port
1 on SmartLi 5.
Step 3 Connect parallel port 1 on SmartLi 4 to parallel port 2 on SmartLi 5.
Issue 02 (2020-05-17)
On the monitoring module, PARALLEL1 is above PARALLEL2.
Copyright © Huawei Technologies Co., Ltd.
5 Operations
72