Registering With The Ocx Plug-In - Huawei FusionModule1000A Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide


Table 8-18 Parameter description
Parameter
Server IP Address
Server Port Number
Login User
Login Password
Step 4 Click Test after configuring parameters.
Step 5 Click Apply.
----End

8.4.4.1.4 Registering with the OCX Plug-in

Only after you register with the OCX plug-in, you can play videos recorded by the camera on
the NetEco in real time.
Issue 02 (2019-12-20)
If not all ActiveX controls are enabled, the test connection fails after filling in the correct
parameter information and clicking Test.
Enable ActiveX controls. For details, see

During the first test, the page turns blank. Wait 30s.

If the test fails, a message indicating a connection failure is displayed.
Copyright © Huawei Technologies Co., Ltd.
8.4.4.1.4 Registering with the OCX
Description
Indicates the IP address of
the VCN.
Indicates the port number of
the server.
NOTE
The default port number for
VCN is 9900.
Indicates the user name for
logging in to the IVS client.
NOTE
The Admin user cannot log in
to the NetEco to connect to the
VCN.
Indicates the password for
logging in to the IVS client.
Click Set Password and
configure the password on
the displayed page.
If the password does not
comply with the rules,
please change the password
on device.
8 Commissioning Core Components
Plug-in.
Example
XXX.XXX.XXX.XXX
9900
Huawei123
Change_Me
104