Scenarios For Connecting The Ecc800 Collector; Commissioning Southbound Devices Of Ecc800 - Huawei FusionModule1000A Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Interface Introduction
Figure 8-19 Adding a device
Table 8-12 Description of the page for adding a device
Area
(1) Management
domain
navigation tree
(2) Device
selection area
(3) Management
domain
(4) Device
(5) Parameter
setting area
(6) Save

8.4.2 Scenarios for Connecting the ECC800 Collector

8.4.2.1 Commissioning Southbound Devices of ECC800

For details, see commissioning chapter in ECC800 Data Center Controller User Manual.
Issue 02 (2019-12-20)
Operation
In the management domain navigation tree, select the management
domain to which the device to be added belongs.
Click the Device tab, select a device type from the drop-down list box,
and click the device to be added.
Drag the selected device to the management domain.
Click the device. The parameter setting area is displayed in the right
pane.
Set device parameters in the parameter setting area.
Click Save. The device is added.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
91