Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Figure 8-6 Teamwork topology
Table 8-6 Notes for the screen
No.
1
2
3
4
5
6
Issue 02 (2019-12-20)
Parameters
Note
On indicates that the smart cooling product is started and Off
On/Off
indicates that the smart cooling product is shut down.
01, 02, 03
Indicates the device address. The minimum address is the master
one and the rest are all slave ones.
NOTE
If the master one offline, the online device with the smallest address is
selected to be the new master.
Active/Stand
Active: properly responds to the requirement control.
by
Standby: responds to the requirement control when active one is
faulty (critical alarms, shutdown, and offline) or cannot meet
cooling requirements.
M/S
M indicates the master unit, and S indicates a slave unit. Blue
indicates that the device is operating, and gray indicates that the
device is idle.
Frame:
A device with green frame indicates the device itself,
green/non-gr
een
as shown in
A non-green frame indicates the other device in the group,
as shown in
Ground
Red indicates that a critical alarm is generated,
color: red,
bright gray
as shown in
Bright gray indicates that the device is operating without any
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
.
.
.
66
Advertisement
Table of Contents
