Table of Contents
Advertisement
®
Advanced Energy
ELECTRICAL SPECIFICATIONS
☞
Important
AE Host command 7 restores all nonvolatile RAM values to factory preset
values. See individual product specifications for factory default parameters.
For more information, contact AE Global Services.
Table 3‑2. Electrical specifications
Description
Input Power
Standard operation
AC facility requirements
• Line voltage
• Line frequency
• Phase
AC to RF efficiency
AC input power factor
AC power consumption
AC line current
Overcurrent protection
RF Output Power
Warm-up time
Frequency tuning range
Frequency stability
57020114-00E
• Nominal: VAC = 208 V, 60 Hz; Low line AC: VAC = 187 V,
60 Hz
• Output power = 2000 W
• Frequency = 400 kHz
• Load = 50 Ω
Facility requirements specification:
• Line voltage: 208 VAC ± 10% (187 VAC to 229 VAC)
• Line frequency: 50 Hz to 60 Hz nominal (47 Hz to 63 Hz)
• Phase: 3φ with ground, no neutral
Nominal: 78%
Low line AC: 79%
Nominal: 0.67
Low line AC: 0.69
Nominal: 2556 W
Low line AC: 2514 W
< 16 A
per phase at 2000 W, 208 VAC
RMS
< 18 A
per phase at 2000 W, low AC line
RMS
50 A circuit breaker with lockout pin
Generator minimum warm-up time of 2 minutes after AC on
360 kHz to 440 kHz
< 50 ppm of selected frequency
Specifications
®
Paramount
MF 2 kW Generator
Specification
3‑3
Advertisement
Table of Contents
Troubleshooting
