Advanced Energy Paramount MF 2 kW User Manual page 70

®
Advanced Energy
Table 4‑10. AE Host commands (Continued)
Command
118
set fixed frequency
memory mode
(subcommand 51)
128
report power supply
type
57020114-00E
Description
◦ 2 = Delivered power limit
If you selected SOA mode
◦ 0 = Disabled
◦ 1 = Enabled
If you selected memory mode:
◦ 0 = Volatile
◦ 1 = Nonvolatile
Command 248 reports this value; B0 = 50.
Sets the fixed frequency mode to either
volatile or nonvolatile.
• When set to volatile, the fixed frequency
defaults to the center frequency on power
up.
• When set to nonvolatile, the fixed
frequency defaults to the factory default
fixed frequency setting or last setting if
changed from the factory default. See
product specification for the fixed
frequency factory default setting.
The factory default setting for this command
is configured for each product option. See the
product specification for the default setting.
Send 4 data bytes.
• Bytes 0 and 1 = 51 (set fixed frequency
memory mode)
• Bytes 4 and 5 = Mode setting
◦ 0 = Volatile
◦ 1 = Nonvolatile
Command 248 reports this value; B0 = 51.
Reports the power supply type.
You can send 0 or 1 data bytes.
Send 0 data bytes:
Communication Controls
®
Paramount MF 2 kW Generator
Data Bytes
Sent
Returned
4
0 or 1 9 or 10
characters
Data
Bytes
1
ASCII
4‑38