Advanced Energy Paramount MF 2 kW User Manual page 91

®
Advanced Energy
Table 4‑10. AE Host commands (Continued)
Command
248
report operating
parameters
57020114-00E
Description
◦ 0 = Diagnostics in progress
◦ 1 = Diagnostic test complete – passed
◦ 2 = Diagnostic test complete – failed
◦ 3 = Diagnostic test interrupted
◦ 4 = Diagnostic mode disabled
• Byte 1 = Failure status (bit flags)
◦ Bit 0 = Forward power
◦ Bit 1 = Rectified bus voltage
◦ Bit 2 = Test voltage
◦ Bits 3 through 7 = Unused
• Bytes 2 through 4 = Unused
• Byte 4 = Unused
This command allows you to send
subcommands that report a variety of
operating parameters. Send a value in the first
two bytes that selects the parameter to report.
The subcommands are 16-bit commands
ranging in value from 1 to 65535.
Your unit may not have all the features in this
list. If you issue a command for a feature that
your unit does not have, the unit returns CSR
12, Feature Not Available.
Byte 0 =
1 Report frequency step
minimum
2 Report frequency step
maximum
3 Report step up gain
4 Report step down gain
6 Report gamma threshold
high
7 Report gamma threshold
low
Communication Controls
Paramount
Subcommand
®
MF 2 kW Generator
Data Bytes Data
Sent Bytes
Returned
variable variable
4‑59