Table of Contents
Advertisement
Configuring the External Analyzer
After you have assembled the external analyzer probe and connected it to the
emulator and target system, the next step is to configure the external
analyzer.
The external analyzer is a versatile instrument, and you can configure it to
suit your needs. For example, you can specify threshold voltage levels on the
external analyzer channels, and you can operate the external analyzer in
several different modes.
The default configuration specifies that the external analyzer is aligned with
the emulation analyzer. TTL level threshold voltages are defined, as well as
an external label named "xbits" which contains all 16 channels.
In order to configure the external analyzer, you must first start the
configuration interface and access the "External Analyzer" configuration
section (refer to the "Using the Configuration Interface" section in the
"Configuring the Emulator" chapter).
294
Advertisement
Table of Contents
