Table of Contents
Advertisement
Error Messages
HP 64700 I/O error; power down detected
Cause: The emulator power was cycled.
Action: Do not do this during a user interface session; this may force the user
interface to end immediately.
HP64700 I/O channel busy; communications timed out
Cause: The communications channel is in use for an unusually long period of
time by another command.
Action: try again later.
HP64700 I/O channel in use by emulator: <LOGICAL NAME> (10331)
Cause: You tried to start an emulator interface, but your attempt failed
because the emulator is already in use by someone else.
Action: Current user must release the emulator.
HP64700 I/O channel semaphore failure: <string>
Cause: Semaphore (ipc) facility not installed.
Action: Reconfigure the kernel to add ipc facility.
HP64700 I/O error; connection timed out
Cause: A user abort occurred while attempting to connect via LAN.
Action: Possibly connecting to an emulator many miles away, be patient.
Illegal status combination
Cause: You tried to specify combinations of status qualifiers in expressions
incorrectly when entering commands.
Action: Refer to the "Emulator/Analyzer Interface Commands" chapter for
information about syntax of commands.
Illegal symbol name
Cause: You tried to specify incorrect symbol names when entering commands.
Action: Specify correct symbol names. To see global symbol names, use the
display global_symbols command. To see local symbol names, use the
display local_symbols_in <SYMB> command.
462
Advertisement
Table of Contents
