Using the Emulator
To clear all execution breakpoints
To clear all execution breakpoints
•
When displaying breakpoints, position the mouse pointer within the
breakpoints display screen, press and hold the select mouse button,
and choose Clear (delete) All Breakpoints from the popup menu.
•
Choose Breakpoints→Clear All.
•
Using the command line, enter:
modify software_breakpoints clear
To display the status of all execution breakpoints
•
Choose Breakpoints→Display or Display→Breakpoints.
•
Using the command line, display the status of all breakpoints by
selecting:
display software_breakpoints
The breakpoints table shows you whether the breakpoints feature is
currently enabled or disabled. Also, the status is shown for each breakpoint
in memory. If "Pending," the BKPT instruction is in memory at that location
and the breakpoint is set. If "Inactive," the memory location contains the
original instruction, and the breakpoint will not be executed.
Active breakpoints are indicated in the memory mnemonic display by
asterisks beside the lines with breakpoints set.
168