To Display Information About The Memory Map - HP 64782 User Manual

For the graphical user interface

Hide thumbs Also See for 64782:

Table of Contents

Configuring the Emulator

To display information about the memory map

To display information about bus interface ports from the emsim (emulator)

(Emulator SIM) from either the configuration interface the

emulator/analyzer interface pulldown menu.

The following table reflects the current values in the emsim register set

that relate to the external bus interface.

into the processor when the monitor is entered from emulation reset.

To display information about the memory map

Choose Display→Configuration Info→Memory Map from either

the configuration interface the emulator/analyzer interface pulldown

Using the emulator/analyzer interface command line, enter the

display configuration_info memory_map command.

When in the memory map section of the emulator configuration, the ranges of

memory that have been mapped are displayed.

The memory map configuration information shows detailed information about

the memory map and how actual mapper resources are allocated due to the

current programming of the chip selects in the EMSIM and EMRAM register

When the emulator automatically expands the memory map to assign actual

mapper resources, it looks at ranges that have been mapped during emulator

configuration.

These values will be loaded

DSACK1 DSACK0