To Access Context Sensitive (F1) Help; To Exit The Configuration Interface; To Load An Existing Configuration File - HP 64782 User Manual

To access context sensitive (f1) help

•
Place the mouse pointer over the item you're interested in, and press
the f1 key.
•
Choose Help→On Item... from the pulldown menu in the top-level
configuration interface window. Notice that the mouse pointer
changes from an arrow to a question mark. Move the question mark
mouse pointer over the item you're interested in, and click any
mouse button.
The configuration interface provides context sensitive help in the top level
dialog box and throughout the configuration section dialog boxes.

To exit the configuration interface

•
Choose File→Exit... from the pulldown menu in the top-level
configuration interface window (or type <CTRL>x).
If configuration changes have not been stored to a file, a confirmation dialog
box appears, giving you the options of: storing, exiting without storing, or
canceling the exit.

To load an existing configuration file

•
In the emulator/analyzer interface, choose File→Load→Emulator
Config... from the pulldown menu, and use the file selection dialog
box to specify the configuration file to be loaded.
•
Using the command line, enter the load configuration <FILE>
command.
This command loads previously created and stored configuration files. You
cannot load a configuration while the configuration interface is running.
Configuring the Emulator
To access context sensitive (f1) help
103