Step 11: Display Memory At An Address In A Register - HP 64782 User Manual

Step 11: Display memory at an address in a register

Click on the Disp @REG action key.
1
Or, using the command line, enter the name of the command file:
mematreg
A command file dialog box appears (or a prompt appears in the command
line).
Move the mouse pointer to the dialog box text entry area, type "A7"
2
(uppercase), and click on the "OK" button.
Or, if the prompt is in the command line:
A7
Figure 11
Step 11: Display memory at an address in a register
Getting Started
43