If Apply To Emulator Fails - HP 64782 User Manual

If apply to emulator fails

Choose Display→Failed Apply Info from the pulldown menu in the
top-level configuration interface window.
A window containing the following information about the failed configuration
is opened:
•
Chip select information from the emsim (emulator) resister set.
•
Bus interface port information from the emsim (emulator) resister set.
•
The expanded memory map.
•
Reset mode configuration information.
•
A complete list of the configuration inconsistencies. This list is not limited
to 16 messages as is the Display→Configuration Info→Diagnostics
command.
This information is shown in the same format as output from the various
Display→Configuration Info→ commands.
Because the old configuration is reloaded when an apply to emulator fails, the
information displayed in this window is different than the information
displayed by the Display→Configuration Info→ commands (which display
information about the configuration currently loaded).
Refer to the "Verifying the Emulator Configuration" section later in this
chapter for details on these types of configuration information displays.
Configuring the Emulator
If apply to emulator fails
99