Table of Contents
Advertisement
Using the Sequencer
When you use the analyzer's sequencer, you can specify traces that trigger on
a series, or sequence, of states. You can specify a state which, when found,
causes the analyzer to restart the search for the sequence of states. Also, the
analyzer's sequencer allows you to trace "windows" of code execution.
This section describes how to:
•
Trigger after a sequence of states.
•
Specify a global restart state.
•
Trace "windows" of program execution.
•
Specify both sequencing and windowing.
The sequencing and windowing capabilities from within the Softkey Interface
are not as powerful or flexible as they are from within the Terminal Interface.
For example, in the Terminal Interface, you can specify different restart
states for each sequence term and you can set up a windowing trace
specification where the trigger does not have to be in the window. If you do
not find the sequencing flexibility you need from within Softkey Interface,
refer to the 6833x Emulator User's Guide for the Terminal Interface.
223
Advertisement
Table of Contents
