Setting Up The Analyzer From The Disc - HP 10343B Operating Manual

Setting Up the
Analyzer from
the Disc
The logic analyzer must be configured for SCSI Bus analysis by loading
the configuration file from the flexible disc after loading the inverse
assembler file. To load the configuration file:
1. With the disc drive connected, install the flexible disc labeled "HP
10343B Inverse Assemblers for use with HP 1630A/D/G and HP
1631A/D" in the HP 9121D/S or HP 9122D/S disc drive.
2. Select the SYSTEM menu of the logic analyzer and press the NEXT[ ]
or PREV[ ] key until the [Storage Operations] menu is displayed.
3. Select the [Storage Operations] field with the CURSOR keys and press
INSERT to list the files on the disc.
4. Press the ROLL keys until the cursor ( > ) is next to the configuration
file.
• For the HP 1630A/D and HP 1631A/D, load the configuration file
"CSCSICON."
• For the HP 1630G, load the configuration file "CSCSICONG."
5. Select the Operation field with the CURSOR keys and press the
NEXT[ ] or PREV[ ] key until the [Load] operation is displayed.
6. Press INSERT to load the file into the HP 1630A/D/G or HP 1631A/D
Logic Analyzer.
Note
You must reload the configuration file into the analyzer everytime
you load a different inverse assembler.
SCSI Bus Preprocessing
2-19