HP 64782 User Manual page 451

Error Messages
Cannot access register for this processor type (168)
Cause: You have tried to access a register that is not present in the type of
processor that the emulator has determined is present.
Cannot create module file:
Cause: Insufficient disk space for the module file.
Action: Check disk space under /usr/hp64000.
Cannot default emulator; already in use (10332)
Cause: You tried to start an emulator interface, but your attempt failed
because the emulator is already in use by someone else.
Action: Current user must release the emulator.
Cannot interpret emulator output (10350)
Cause: There may be characters dropped in the information returned from
the emulator.
Action: Ignore this message unless it becomes frequent. If it becomes
frequent, you may have a fatal error; call your HP 64700 representative.
Cannot lock emulator; failure in obtaining the accessid
Cannot lock emulator; failure in <ERRNO MSG>
Cannot modify program counter to an odd value (164)
Cause: The emulator will not allow you to modify the content of the program
counter to an odd value.
Cannot modify stack pointer to an odd value (163)
Cause: The emulator will not allow you to modify the stack pointer to an odd
value.
Cannot run emulator pv in ACT mode with processor type = 331 (169)
Cause: The emulator is in ACT mode, the processor type is 68331, and you
have attempted to run the pv command.
Action: When running emulator performance verification with the emulator
in ACT mode, the processor type must be 332.
450