Table of Contents
Advertisement
Emulator/Analyzer Interface Commands
modify register
modify register
This command allows you to modify the contents of the emulation processor
internal registers.
The entry you specify for <REGISTER> determines which register is
modified. Individual fields of control registers may be modified.
Register modification cannot be performed during real-time operation of the
emulation processor. A break command or condition must occur before you
can modify the registers.
The parameters are as follows:
--EXPR--
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying a register value. For the floating-point registers, the
value is interpreted as a decimal real number. See the --EXPR-- description.
<REGISTER>
This represents the name of a register.
to
Allows you to specify the values to which the selected registers will be
changed.
Examples
modify register D2 to 41H
See Also
The copy registers, display registers, and modify registers commands.
396
Advertisement
Table of Contents
