Step 4: Step High-Level Source Lines - HP 64782 User Manual

Step 4: Step high-level source lines

You can step through the program by high-level source lines. The emulator
executes as many instructions as are associated with the high-level program
source lines.
To step a source line from the current program counter, click on the
1
Step Source action key.
Or, using the command line, enter:
step source
Notice that the highlighted bar (the current program counter) moves to the
next high-level source line.
Step into the "init_system" function by continuing to step source
2
lines, either by clicking on the Step Source action key, by clicking
on the Again action key which repeats the previous command, or by
entering the step source command on the command line.
Figure 5
Getting Started
Step 4: Step high-level source lines
35