Table of Contents
Advertisement
Step 4. Verify the software installation
A number of product filesets were installed on your system during the
software installation process. Due to the complexity of installing on NFS
mounted file systems, a script that verifies and customizes these products
was also installed. This stand alone script may be run at any time to verify
that all files required by the products are in place in the file system. If
required files are not found, this script will attempt to symbolically link them
from the $HP64000 install directory to their proper locations.
•
Run the script $HP64000/bin/envinstall.
Step 5. Map your function keys
If you are using the conventional Softkey Interface, map your function keys
by following the steps below.
Copy the function key definitions by typing:
1
cp $HP64000/etc/ttyswrc ~/.ttyswrc
This creates key mappings in the .ttyswrc file in your $HOME directory.
Remove or comment out the following line from your .xinitrc file:
2
xmodmap -e 'keysym F1 = Help'
If any of the other keys F1-F8 are remapped using xmodmap, comment out
those lines also.
Step 4. Verify the software installation
Installation
521
Advertisement
Table of Contents
