The Getting Started Tutorial
This tutorial gives you step-by-step instructions on how to perform a few
basic tasks using the emulator/analyzer interface. The tutorial examples
presented in this chapter make the following assumptions:
•
The HP 64782B-H emulator and HP 64703/4 analyzer are installed into the
HP 64700 Card Cage, the HP 64700 is connected to the host computer,
and the Graphical User Interface software has been installed as outlined in
the "Installation" chapter.
•
The emulator is operating out-of-circuit (that is, not plugged into a target
system).
The Demonstration Program
The demonstration program used in this chapter is a simple environmental
control system. The program controls the temperature and humidity of a
room requiring accurate environmental control.
31