Connecting To The Hp 10269C; Setting Up The Analyzer From The Disc - HP 10312D Operating Manual

Connecting to
the HP 10269C
Setting Up the
Analyzer from
the Disc
Analyzing the Intel 80286
1-12
Connect the HP 1650A or HP 16510A Logic Analyzer pods to the
HP 10269C General Purpose Probe Interface as follows:
HP 1650A and 16510A
Pod
1
2
3
(into) HP10269C
Connector
1
2
3
The logic analyzer can be configured for 80286 analysis by loading the
appropriate configuration file from the flexible disc. Loading
this
file
will
also load the inverse assembler file. To load the configuration and
inverse assembler:
1. Install the flexible disc labeled "80286 Inverse Assembler for use
with: HP 1650A and HP 16510A" in the front disc drive of the logic
analyzer.
2. Select one of the following menus:
• For the HP 1650A, select the I/O Disc Operations menu;
• For the HP 16510A, select the System Front Disc menu.
3. Configure the menu to "Load" the analyzer from the file "C80286_1."
4. Execute the load operation to load the file into the HP 1650A or
HP 16510A Logic Analyzer.