Exiting Hp 64700 Interfaces; To Close An Interface Window - HP 64782 User Manual

Exiting HP 64700 Interfaces

There are several options available when exiting the HP 64700 interfaces.
You can simply close one of the open interface windows, or you can exit the
debug session by closing all the open windows. When exiting the debug
session, you can lock the emulator so that you can continue later, or you can
release the emulation system so that others may use it. This section
describes how to:
•
Close an interface window.
•
Exit a debug/emulation session.

To close an interface window

•
In the interface window you wish to close, choose
File→Exit→Window. In the emulator/analyzer interface command
line, enter the end command with no options.
All other interface windows remain open, and the emulation session
continues, unless the window closed is the only one open for the emulation
session. In that case, closing the window ends the emulation session, but
locks the emulator so that other users cannot access it.
61