Table of Contents
Advertisement
Starting and Exiting HP 64700 Interfaces
To exit a debug/emulation session
To exit a debug/emulation session
•
To exit the interface, save your configuration to a temporary file, and
lock the emulator so that it cannot be accessed by other users,
choose File→Exit→Locked. In the emulator/analyzer interface
command line, enter the end locked command.
•
To exit the interface and release the emulator for access by other
users, choose File→Exit→Released. In the emulator/analyzer
interface command line, enter the end release_system command.
If you exit the interface locked, the interface saves the current configuration
to a temporary file and locks the emulator to prevent other users from
accessing it. When you again start the interface with the emul700 command,
the temporary file is reloaded, and therefore, you return to the configuration
you were using when you quit the interface locked.
Also saved when you exit the interface locked are the contents of the entry
buffer and command recall buffer. These recall buffer values will be present
when you restart the interface.
In contrast, if you end released, you must have saved the current
configuration to a configuration file (if the configuration has changed), or the
changes will be lost.
62
Advertisement
Table of Contents
