Load - HP 64782 User Manual

For the graphical user interface

Hide thumbs Also See for 64782:

Table of Contents

Emulator/Analyzer Interface Commands

load

This command transfers absolute files from the host computer into emulation

or target system RAM. With other parameters, the load command can load

emulator configuration files, trace records, trace specifications, or symbol

The absolute file contains information about where the file is stored. The

memory map specifies that the locations of the file are in user (target

system) memory or emulation memory. This command also allows you to

access and display previously stored trace data, load a previously created

configuration file, and load absolute files with symbols.

Note that any file specified by <FILE> cannot be named "configuration",

"emul_mem", "user_mem", "symbols", "trace", or "trace_spec" because these

are reserved words, and are not recognized by the emulator/analyzer

interface as ordinary file names.

The absolute file is loaded into emulation memory by default.

The parameters are as follows:

configuration

This option specifies that a previously created emulation configuration file

will be loaded into the emulator. You can follow this option with a file name.

Otherwise the previously loaded configuration will be reloaded.