Displaying and Modifying Registers
This section describes tasks related to displaying and modifying emulation
processor registers.
Within the interface, related registers are grouped into a class. For example,
the <BASIC> register class includes general registers, such as the PC, ST,
USP, SSP, and data and address registers. You can display the contents of an
individual register, a register class, or all registers.
This section shows you how to:
•
Display register contents.
•
Modify register contents.
To display register contents
•
Choose Display→Registers→<register class>.
•
Using the command line, enter the display registers <register
class> command.
When displaying registers, you can display classes of registers and individual
registers.
170