Table of Contents
Advertisement
Turn OFF target system power before connecting analyzer probe wires to
C A U T I O N
the target system. The probe grabbers are difficult to handle with precision,
and it is extremely easy to short the pins of a chip (or other connectors
which are close together) with the probe wire while trying to connect it.
3 You can connect the grabbers to pins, connectors, wires, etc., in the target system. Pull the hilt of the
grabber towards the back of the grabber handle to uncover the wire hook. When the wire hook is around the
desired pin or connector, release the hilt to allow the grabber spring tension to hold the connection.
Using the External State Analyzer
To connect the external analyzer probe to the target system
293
Advertisement
Table of Contents
