Figure 31
If you're using the Softkey Interface from a terminal or terminal emulation
window, you don't get a dialog box from which to choose configuration
sections; however, you have access to the same configuration options
through a series of configuration questions. To access the questions in the
"Interactive Measurement Specification" section, answer "yes" to the "Modify
interactive measurement specification?" question.
This section shows you how to:
•
Drive the emulation analyzer trigger signal to the CMB.
•
Drive the emulation analyzer trigger signal to the BNC connector.
•
Drive the external analyzer trigger signal to the CMB.
•
Drive the external analyzer trigger signal to the BNC connector.
•
Break emulator execution on signal from CMB.
•
Break emulator execution on signal from BNC.
•
Break emulator execution on external analyzer trigger.
Making Coordinated Measurements
To disable synchronous measurements
315