Table of Contents
Advertisement
Error Messages
<LOGICAL NAME>: End, released
Cause: This is a status message. The emulation session is being exited with
the end release_system command. When the session has ended, the emulator
is released, meaning that others can access and use it. When you restart the
emulation session later, the new session will use all default settings. The
emulator logical name is located in the /usr/hp64000/etc/64700tab.net (or
64700tab) file.
64700 command aborted (10371)
Cause: User abort occurred due to emulator being monopolized by another
command.
Action: Don't issue an abort.
Address range too small for request - request truncated
Cause: Too small of an address range is specified in a modify memory
command.
Action: Specify a larger memory range.
Adjust PC failed during break (600)
Cause: System failure or target condition.
Action: Run performance verification (Terminal Interface pv command), and
check target system.
Ambiguous address: %s (312)
Cause: Certain emulators support segmentation or function code information
in addressing. The emulator is unable to determine which of two or more
address ranges you are referring to, based upon the information you entered.
Action: Re-enter the command and fully specify the address, including
segmentation or function code information.
Ambiguous address: (140)
Cause: The address for the tag memory access was ambiguous.
447
Advertisement
Table of Contents
