Table of Contents
Advertisement
Examples
Set the depth of the trace memory to 256 states:
Choose Trace→Display Options... and in the dialog box, enter 256 in the
field beside Unload Depth. Then click the OK or Apply pushbutton.
Set the depth of the trace to 1024 states:
display trace depth 1024
To display program memory associated with a trace
list line
•
Using the mouse, place the cursor on the line in the trace list where
you want to see the associated content of program memory. Then
press the select mouse button, and click on Display Memory At in
the trace list popup menu.
You will see a display of memory at the location of the program that emitted
the selected trace list line. This is the same as placing the program address
of the selected trace list line in the entry buffer and choosing
Display→Memory→At() in the pulldown menus.
To open an edit window into the source file associated
with a trace list line
•
Using the mouse, place the cursor on the line in the trace list whose
source file you wish to edit. Then press the select mouse button, and
click on Edit Source in the trace list popup menu.
A new window will open. It will show the source file that emitted the line you
selected in the trace list. An edit session will be in progress on the source file
in the new window. When you complete the desired edit, save the file and
close the window.
To display program memory associated with a trace list line
Using the Emulation Analyzer
249
Advertisement
Table of Contents
