Using The External State Analyzer - HP 64782 User Manual

Using the External State Analyzer

The HP 64703A analyzer provides an external analyzer with 16 external trace
channels. These trace channels allow you to capture activity on signals
external to the emulator, typically other target system signals. The external
analyzer may be configured as an extension to the emulation analyzer, as an
independent state analyzer, or as an independent timing analyzer.
When the external analyzer is configured as an independent state analyzer,
the emulator/analyzer interface does not control the external analyzer.
However, you can use pod commands to control the independent state
analyzer via the terminal interface. Refer to the 6833x Emulator User's
Guide for the Terminal Interface for information on using the external
analyzer when it is configured as an independent state analyzer.
When the external analyzer is configured as an independent timing analyzer,
you must use a special Timing Analyzer Interface program. Refer to the
Timing Analyzer Interface User's Guide for information on using the
external analyzer when it is configured as an independent timing analyzer.
The tasks you perform with the external analyzer are grouped into the
following sections:
•
Setting up the external analyzer.
•
Configuring the external analyzer.
290