Drx Priority Setting (Le Device); Dvox Function - Icom ID-52A Advanced Manual

13
Bluetooth ® OPERATION
Headset Settings
DAuto Disconnect
[MENU] > SET > Bluetooth Set > Headset Set >
Auto Disconnect
You can set the disconnect timer between 0 and 10
seconds or OFF�
If there is no audio signal to the Bluetooth headset, or
no operation is performed for a set period of time, the
receiver automatically disconnects the Synchronous
Connection-Oriented (SCO) link�
L When a signal is received, or an operation is performed
while the SCO link is disconnected, the receiver will
automatically reconnect the SCO link again�
L See page 12-32 for details�

DRX Priority Setting (LE Device)

[MENU] > SET > Bluetooth Set > Headset Set >
RX Priority Setting (LE Device)
You can select the communication priority for the DV
Fast Data and receive audio, when connecting an iOS
device (Bluetooth LE (Low Energy)) and a Bluetooth
headset�
The Bluetooth LE communication cannot be
simultaneously used for both DV Fast Data and
Headset audio�
L When connecting to a SPP (Serial Port Profile) device
such as data device or PC, the Bluetooth devise functions
according to the "Serialport Function" (p� 12-34) setting�
L See page 12-33 for details�

DVOX function

The Voice Operated eXchange (VOX) function toggles
the transceiver between transmit and receive by your
voice� This function provides hands-free operation�
You can use the VOX function with the optional VS-3
or a third party's Bluetooth headset�
Depending on the headset, the VOX function may be
disabled because of the differences in microphones�
NOTE:
• If the transceiver does not connect to a Bluetooth
headset, you cannot use the VOX function through
Bluetooth, even if "VOX" is set to ON�
BE SURE to check the Bluetooth connection between
the transceiver and the headset before using the VOX
function�
• This setting is used for when using the Bluetooth
microphone�
See page 15-10 for using the external microphone�
L See page 12-33 for details on the setting items and their
options�
[MENU] > SET > Bluetooth Set > Headset Set > VOX
VOX screen
You can turn the VOX function ON or OFF�
VOX Level screen
You can set the VOX gain level� Higher values make
the VOX function more sensitive to your voice�
VOX Delay screen
You can set the VOX Delay� The VOX Delay is the
amount of time the transmitter stays ON after you stop
speaking, before the VOX switches to receive�
VOX Time-Out Timer screen
You can set the VOX Time-Out Timer to prevent an
accidental prolonged transmission� To disable the
function, set to "OFF�"
13-5