Table of Contents
Advertisement
■ Setting the Call channel
By default, a Call channel is set in each Channel Group.
You can set the Call channel with your most often-used
channel for quick recall.
1.
Push [MENU].
• The "MENU" screen is displayed.
2. Rotate [CH/ENT] to select "Radio Settings," then push
[ENT].
3. Rotate [CH/ENT] to select "Call Channel," then push
[ENT].
• The "CALL CHANNEL" screen is displayed.
4.
Rotate [CH/ENT] to select a channel to be set as the
Call channel, then push [ENT].
5. Push [MENU] to return to the Main screen.
TIP: To confirm that your setting is correctly set, hold
down [16/C] for 1 second. (p. 14)
Rotate
+
Push
■ Microphone Lock function
The Microphone Lock function electrically locks [∫], [√],
[16/C] and [H/L] on the supplied microphone.
This prevents accidental channel changes or function access.
While holding down [H/L] on the microphone, hold down [ ]
for 1 second to turn ON the transceiver.
• The Microphone Lock function is turned ON or OFF.
[H/L]
BASIC OPERATION
[16/C]
[∫], [√]
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Advertisement
Table of Contents
