D Keyer Set Menu (Cw-Key Set) - Icom IC-9700 Advanced Manual

1. ADVANCED OPERATIONS
Operating CW (ADVANCED)

D Keyer set menu (CW-KEY SET)

In this menu, you can set the memory keyer repeat
time, dash weight, paddle specifications, key type,
and so on.
Setting example
1. Display the CW-KEY SET menu in the CW mode.
» KEYER > EDIT/SET > CW-KEY SET
MENU
2. Select the setting item. (Example: Side Tone Level)
3. Adjust the Side Tone Level. (Example: 80%)
4. To close the CW-KEY SET screen, push
several times.
Side Tone Level
Adjust the CW side tone output level.
• Adjust to between 0 ~ 100%.
Side Tone Level Limit
Turn the CW side tone level limit ON or OFF.
This disables the CW side tone when you rotate
(inner) above the side tone level.
AF RF/SQL
Keyer Repeat time
Set the time between Memory keyer transmissions.
• Set to between 1 ~ 60 seconds.
L After transmitting a Memory keyer, the transmission is
repeated after the set time period.
is displayed even between transmissions.
L
Dot/Dash Ratio
Set the dot/dash ratio.
• Set to between 1:1:2.8 ~ 1:1:4.5 in 0.1 steps.
Keying weight example: Morse code "K"
Rise Time
Set the rise time of the transmitted CW envelope.
• Set to 2, 4, 6 or 8 milliseconds.
Key action
TX output
power
EXIT
Paddle Polarity
Set the paddle dot-dash polarity to Normal or
Reverse.
(Default: 50%)
• Normal: Right = dash, Left = dot
• Reverse: Right = dot, Left = dash
Key Type
(Default: ON)
Set the key type for the [KEY] connector on the rear panel.
• Set to Straight, Bug or Paddle.
L When using an external Elec-keyer, select "Straight."
MIC Up/Down Keyer
(Default: 2sec)
Set the microphone [UP]/[DN] keys to use as a CW key.
• ON:
• OFF:
LThe [UP]/[DN] keys do not work as a "squeeze key."
L When "ON" is selected, you cannot change the frequency
and the Memory channels using the [UP]/[DN] keys.
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays the
Quick menu, and then touch "Default" to reset to the
default setting.
1-4
Dot
1 1
Default: 1:1:3
1 1 2.8∼4.5
Setting range
1:1:2.8 to 1:1:4.5
Setting range
TX
RX
0
Rise time
Use the [UP]/[DN] keys as a CW key.
Do not use the [UP]/[DN] keys as a CW key.
(Default: 1:1:3.0)
Dash Dash
3
Space
(Default: 4ms)
Set TX output power
Time
(Default: Normal)
(Default: Paddle)
(Default: OFF)