Dusing Tx History; Ddirectly Entering (Ur) - Icom ID-52A PLUS Advanced Manual

5
D-STAR OPERATION (ADVANCED)
"TO" (Destination) setting

DUsing TX History

TX History saves the repeater and station name and
call sign of up to 20 "TO" (Destination) settings used
when you made the calls�
NOTE: Until you make a call in the DV mode, you
cannot select "TO" (destination) from the TX History�
Example: Selecting the "Kirkland (IA)" repeater in the
TX History�
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select "TO," and then push [ENT]�
3� Select "TX History�"
4� Select a destination repeater�
The Sub name is
displayed when a
repeater is selected�
• Returns to the DR screen, and the selected repeater
name is displayed in "TO�"
TIP: You can add the TX HISTORY data to memory,
or delete it from the TX HISTORY screen�
Push [QUICK], then select the option�

DDirectly entering (UR)

The destination station call sign can be directly entered�
Example: Directly entering the call sign "JM1ZLK�"
1� Hold down [DR] for 1 second to display the DR
screen�
2� Push D-pad() to select "TO," and then push [ENT]�
3� Select "Direct Input (UR)�"
4� Enter a call sign of up to 8 characters, including
spaces�
L See page iii on how to enter characters�
5� After entering, push [ENT]�
• Returns to the DR screen and the entered call sign is
displayed in "TO�"
L After entry, you can edit the call sign in the DIRECT
INPUT (UR) screen�
L The entered call sign remains on the DIRECT INPUT
(UR) screen until you enter a new call sign�
TIP: If the entered call sign is duplicated in the "Your
Call Sign" memory, the name is displayed�
(Only when the name has been entered�)
5-11