Adapter Ram Hardware Address Overview; Cx1500-B510 (Slave) - Beckhoff CX1500-M510 Manual

Product overview
2.1.3

Adapter RAM Hardware address overview

available memory addresses for CX1000: D0000-EFFFF (hex)
Base Address End Address (hex) Size(Bytes)(hex)
(hex)
D6000 D7FFF
E6000 E7FFF
available memory addresses for CX1020: D0000-DFFFF (hex)
Base Address End Address (hex) Size(Bytes)(hex)
(hex)
D6000 D7FFF
For CX1020 the memory space upper DFFFF is reserved for the BIOS and other functions.
For some fieldbus connections (all Slave modules) the base addresses are mapped in the memory region
upper DFFFF(hex). So this modules must be ordered with other base addresses. The same situation takes
place if more than two or more master modules of same type are used (for more see note below). The order
numbers for the modules are:
Order number
CX1500-M510-0001
CX1500-M510-0002
CX1500-M510-0003
CX1500-M510-0004
CX1500-M510-0005
Two connection modules (master or slave) can be used simultaneously. If more than two connec-
tions are needed call Beckhoff Automation GmbH for further information.
2.2

CX1500-B510 (Slave)

Fieldbus connection enable the distributed collection of process data and signals, even for distant machines
or equipment. The use of fieldbus master modules in a CX1000 / CX1020 system enables the
utilization of all Beckhoff fieldbus components (e. g. Bus Coupler, Bus Terminal Controller, drive technology)
as distributed control components for the assembly of complex systems.
10
Access Type
2000 R/W
2000 R/W
Access Type
2000 R/W
Alternative ISA-Address
D4000
D6000
D8000
DA000
DC000
Version: 1.0
Description
CX1500-M510
CANopen Master
DPRAM
CX1500-B510
CANopen Slave
DPRAM
Description
CX1500-M510
CANopen Master
DPRAM
CX1500-M510, CX1500-B510