Honda Acura NSX 1991 Service Manual page 1226

Horns
1 . Open the hood and remove the horn relay from sub
relay box A.
2. There should be continuity between the A and B ter-
minals when the battery is connected to the C and
D terminals.
There should be no continuity when the battery is
disconnected.
23-242
Store a removed airbag assembly with
the pad surface up. If the airbag is improperly stored face
down, accidental deployment could propel the unit with
enough force to cause serious injury.
CAUTION:
l
Carefully inspect the airbag assembly before install-
ing. Do not install an airbag assembly that shows
signs of being dropped or improperly handled, such
as dents, cracks or deformation.
l Always keep the short connector on the airbag con-
nector when the harness is disconnected.
Do not disassembly or tamper with the airbag as-
sembly.
Disconnect the battery negative terminal and then
1 .
disconnect the positive
2. Make sure the wheels are aligned straight forward.
3. Remove the dashboard lower panel.
4. Remove the steering wheel maintenance lid A, and
disconnect the cable reel harness and airbag assem-
bly 2P connector. Connect the short connector (Red)
to the airbag connector.
SHORT
CONNECTOR CONNECTOR
CONNECTOR
terminal.
CABLE REEL
CONNECTOR