Kyocera Copystar CS 3011i Service Manual page 54

(7) Numeric Keypad (NK-7100 / NK-7110)
Numeric Keypad installation requires the following parts.
Numeric Keypad (NK-7100) *1
Numeric Keypad (NK-7110) *2
*1: Except KDA, *2: KDA only
Bundled parts of Numeric Keypad
Numeric Keypad ......................................................1 pc
Numeric Keypad cover.............................................1 pc
Screw (M3x8)...........................................................2 pc
Label ........................................................................1 pc
*:NK-7100 only
Procedures
1. Turn the power switch off and disconnect the power
plug.
2. Remove one screw from the operation unit.
3. Release two hooks, and then remove the operation
unit lid in the direction of the arrow.
Parts Number
1
1
Operation unit
Hook
Figure 1-2-34
1-2-27
Parts number
1903RT0UN0 (Product)
1903RT0US0 (Product)
Hook
Screw
Operation unit lid
2RG/2RH