Kyocera Copystar CS 3011i Service Manual page 234

U600 Initialize: All Data
(Message: Initialize: All Data)
Contents
Initializes software switches, and all data and image memory in the backup data on the FAX PWB accord-
ing to the destination and OEM setting.
Initializes the file system and then initializes the communication record and the registered contents if the file
system is checked and an error is detected there.
Purpose
Initialize the FAX PWB
Method
1.Press the [Start] key.
2.Select [Execute].
*: The screen for entering the destination code and OEM code is displayed.
Execute
3.Select [Country Code] and enter a destination code using the numeric keys.
*: Refer to the following destination code list.
Country Code
OEM Code
*: No need to change the default value of [OEM Code].
4.Press the [Start] key to set the setting value.
*: Data initialization starts.
Press the [Stop] key to cancel the data initialization.
5.The firmware version is displayed after the data initialization.
The firmware version of 3 types of application, boot and IPL is displayed.
*: When initialization is successful, "Completed" is displayed for one second.
*: Where an irregular value is input, when it initializes, the following errors are displayed.
Unknown Country (When Country Code is unknown)
Unknown OEM (When OEM Code is unknown)
Unknown Country (When both are unknown)
Destination code list
Destina-
tion code
000
007
009
022
038
Items
Executing data initialization
Items
Setting Destination code
Sets the OEM code
Destination
Japan
Argentina
Australia
Brazil
China
Contents
Contents
Kind of error
Destina-
tion code
253
↑
↑
↑
↑
1-3-151
2RG/2RH
Destination
CTR21 (European nations)
?Italy
?Germany
?Spain
?U.K.